|
Specification
• Network Ports:
- 48 10/100 Mbps auto sensing Fast Ethernet
- 2 10/100/1000 Mbps auto-sensing Gigabit
Ethernet switching ports (RJ-45)
- 2 SFP slots for SFP GBIC Modules
• Network Protocol and Standards
Compatibility:
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x full-duplex flow control
• Power Supply:
- Power Consumption: 13 W maximum
- 100-240VAC/50-60 Hz universal input
• Physical Specifications:
- Dimensions (W x D x H): 440 x 205 x 43 mm
(17.8 x 8.1 x 1.6 in.)
-Weight: 2.5 kg (5.5 lb)
• Electromagnetic Emissions:
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- C-Tick
• Electromagnetic Immunity:
- EN 55024
• Safety:
- CE mark, commercial
- cUL IEC950/EN60950
• Administrative Switch Management:
- IEEE 802.1Q Static VLAN (Up to 64)
- Port-based VLAN (Up to 50)
- IEEE 802.1p Class of Service (CoS)
- Port-based QoS
- IEEE802.3ad (manual) Link Aggregation
- IEEE 802.1D Spanning Tree Protocol
- RFC 1157 SNMP v1
- RFC 1213 MIB II
- RFC 1643 Ethernet Interface MIB
- RFC 1493 Bridge MIB
- RFC 2131 DHCP client
- Private Enterprise MIB
- Port Mirroring Support
-Web-based configuration
- Configuration Backup/Restore
- Password Access Control
- Firmware upgradeable
• Performance Specifications:
- Forwarding modes: Store-and-forward
- Bandwidth: 13.6 Gbps
- Network latency: <20µs for 64-byte frames in store-andforward
mode for 100 Mbps to 100 Mbps transmission
- Buffer memory: 128 KB
- Address database size: 8,000 media access control
(MAC) addresses per system
- Addressing: 48-bit MAC address
- Mean Time Between Failure (MTBF): 59,000 hours
• Modules:
- AGM731F 1000BASE-SX SFP Module
- AGM732F 1000BASE-LX SFP Module
- AGM733 1000BASE-ZX SFP GBIC
• Limited lifetime
|